Select Page





An elegant and beautiful surface was needed to compliment the grand entrance to Ascot Racecourse – reserved only for the Queen herself. 


A surface fit for a Queen was required at Ascot Racecourse, including the main gates, which only the reigning monarch can enter. The need for the facilities and grounds to be pristine and immaculate at all times is a top priority. A home from home as the Buckingham Palace gardens also have DekorGrip resin surface installed. 

DekorGrip’s approved installers, was carried out within the completion date, as well as within the design and cost parameters. 

DekorGrip resin bond is a two part resin dressing that can be applied to asphalt, concrete, timber or steel surfaces. Surfaces must be must be dry, clean, dust free and smooth (free of undulations and irregularity.) Asphalt surfaces must be closed off using Meon DekorCryl void filler in order to prevent resin from being absorbed by the asphalt during application. Concrete surfaces require Meon Concrete Primer. The two part resin is thoroughly mixed using a whisk and spread onto the surface with a serrated squeegee, selected dried aggregate is then broadcast. All excess aggregate is swept off once resin has cured.

Royal Entrance for Ascot Racecourse DekorGrip resin bond installation

Resin bond surfacing at the entrance gate for Royalty.

Resin bond surfaces can be designed to your specification to suit steps and seamlessly go round obstacles like the poles shown above. 

Did You Know:

MEON can help you get a BBA approved resin surface in a wide choice of blends. Perfect for urban environments and areas of natural beauty. Meon can support you throughout the process and provide an approved list of resin installers.


Request a sample swatch.
Or call Meon today: 02392 200 606

To find out more information on DekorGrip systems, resin bound, resin bond, rubber mulch or resin tree pits, contact:, call 023 9220 0606 or visit: